Deriv and TradingView: The 3 Workflows That Actually Work

Deriv TradingView explained: you can't place orders from TradingView's broker panel on Deriv. Here are the 3 workflows that actually work, step by step.

Deriv and TradingView: The 3 Workflows That Actually Work

By Marcel Hambálek · Senior Trader, For Traders

Deriv is not a TradingView-integrated broker, so you cannot place one-click orders on a Deriv account from inside TradingView's broker panel. What you can do is chart Deriv symbols on TradingView and execute separately on Deriv MT5, Deriv X or Deriv cTrader — or route TradingView alerts to execution via webhooks.

Key takeaways

  • Deriv does not appear in TradingView's broker panel, so native order entry from a TradingView chart into a Deriv account is not supported as of 2026.
  • Deriv's own platforms (Deriv Trader, Deriv X, Deriv cTrader) use their own charting engines or licensed chart widgets — not the full TradingView Supercharts experience with your saved layouts.
  • The practical setup is dual-screen: analyse and alert on TradingView, execute on Deriv MT5 or cTrader with the same symbol open.
  • Deriv's synthetic Volatility Indices are proprietary and are not listed on TradingView — only standard instruments like XAUUSD, EUR/USD and US100 map cleanly to TradingView tickers.
  • There is no official 'Deriv TradingView APK' — third-party APK downloads carrying both brand names are a credential-theft risk.
  • A TradingView-first workflow transfers directly to a prop evaluation, where the chart stays the same but the daily loss limit and max drawdown become the binding constraint.

Watch: related video

Can you trade Deriv directly from TradingView? The straight answer

No — Deriv is not in TradingView's broker panel, so there's no native buy/sell button that sends an order to your Deriv account. You can chart Deriv instruments on TradingView, build watchlists, run Pine Script, and fire alerts, but the actual fill happens somewhere else: Deriv MT5, Deriv X, Deriv cTrader, or a webhook bridge. Anyone searching "deriv tradingview" expecting a plug-and-play connection needs to recalibrate — this is a two-platform workflow, not a one-click integration.

What "TradingView broker integration" actually means

When a broker is genuinely integrated, TradingView hosts the order ticket right on the chart. You click a price level, the ticket opens, you set size and stop, and the broker's API handles the fill in the background. Your position then renders directly on the chart with live floating P&L, and you can drag your stop-loss line to modify the trade without leaving TradingView. That's what you'll see with brokers who've built an actual API connection into TradingView's infrastructure. Deriv hasn't done this — open the TradingView broker panel dropdown and you won't find Deriv listed among the integrated names. No ticket, no auto-sync, no drag-to-modify.

What you can do with Deriv and TradingView today

Plenty, just not execution. You can:

  • Chart any Deriv-tradable instrument — forex pairs, synthetic indices, commodities — using TradingView's full technical toolkit
  • Run custom Pine Script indicators and strategies for backtesting before you risk a single lot on a live or demo Deriv account
  • Build multi-asset watchlists spanning gold, indices, and Deriv's synthetic markets side by side
  • Set price alerts that notify you the moment a level triggers, which you then act on manually inside Deriv MT5, Deriv X, or Deriv cTrader
  • Route those same alerts through a webhook to an automated execution bridge, if you're comfortable setting one up

This covers most of what traders actually need day-to-day — TradingView for analysis, Deriv's own platforms for the trade from tradingview charts workflow, just with a manual or scripted handoff in between.

What you cannot do (stated plainly)

You cannot place an order on your Deriv account by clicking directly on a TradingView chart. You cannot see your Deriv positions auto-populate on the TradingView chart with synced P&L. You cannot modify a live Deriv stop-loss by dragging a line in TradingView. If a deriv x tradingview connection appears in a tutorial promising one-click trading, treat it as a third-party bridge or script, not an official integration — verify what it actually does before connecting API keys.

The rest of this guide walks through the three workflows that actually work: charting Deriv symbols on TradingView while executing in Deriv MT5, mirroring your Deriv X setup for synthetic indices, and setting up alert-to-webhook automation for traders who want to close the gap themselves.

Deriv MT5 vs Deriv X vs Deriv cTrader vs native TradingView: charting compared

Verdict in one line: for pure chart analysis, TradingView Supercharts beats every platform Deriv ships natively, but for execution speed, Deriv MT5 and Deriv cTrader win because the order ticket sits right beside the candle. Pick your tool based on what you're doing at that moment — researching a setup or pulling the trigger — not on brand loyalty.

Charting engine and indicator depth

TradingView Supercharts runs on its own rendering engine with a library north of 100 built-in studies plus tens of thousands of community scripts written in Pine Script. That depth is the whole reason traders bother with a deriv tradingview chart setup in the first place. Deriv MT5's built-in charts, by contrast, are MetaQuotes charts — not TradingView, no matter how the marketing language blurs it. They cover the standard MT5 indicator set (MA, RSI, MACD, Bollinger Bands, custom MQL5 indicators) but nothing close to Pine Script's ecosystem. Deriv X leans on a licensed charting widget that looks TradingView-ish but ships a reduced toolset — fewer drawing tools, fewer indicator slots, no Pine Script support. Deriv cTrader uses cAlgo's own charting layer, solid for cTrader-native indicators (cBots, custom cAlgo code) but again disconnected from TradingView's library.

Order entry, hotkeys and one-click trading

This is where native deriv tradingview mt5 workflows flip the advantage back. MT5 and cTrader both let you right-click a chart level and fire a market or pending order instantly, with the ticket, SL/TP and lot size all visible on the same screen. TradingView has no such button for Deriv — there's no broker integration, so every signal you spot on Supercharts has to be re-entered manually on MT5, Deriv X or cTrader. For scalpers and news traders reacting to NFP or FOMC prints, that extra five seconds of alt-tabbing matters.

Alerts, scripting and layout sync

TradingView alerts can trigger on any Pine Script condition and fire to email, SMS, app push or a webhook — the mechanism most Deriv traders use to approximate automation, as covered in the next section. MT5 alerts are tied to MQL5 Expert Advisors and are weaker for condition-based triggers. Deriv X and cTrader sync your watchlists and layouts across devices within their own ecosystem, but none of the three carry your TradingView drawing tools or saved layouts over — you rebuild support/resistance lines manually on each platform.

PlatformCharting engineScripting languageOrder entry on chartAlerts
TradingView SuperchartsNative TradingViewPine ScriptNo (no Deriv broker panel)Strong, webhook-capable
Deriv MT5MetaQuotes chartsMQL5Yes, one-clickBasic, EA-dependent
Deriv XLicensed widget, reduced toolsetNone (platform-controlled)YesBasic
Deriv cTradercAlgo chartingcAlgo (C#)Yes, one-clickModerate, cBot-driven

Workflow 1: Use the TradingView-style charts built into Deriv platforms

If you want zero lag between what you see and what you fill, skip the second window entirely — Deriv Trader's own charting handles candlesticks, drawing tools and a working indicator set without ever leaving the execution screen. This is the deriv tradingview chart alternative most scalpers end up using by default, not by compromise.

Step-by-step: switching chart types inside Deriv Trader

  1. Log into Deriv Trader and select your market — for synthetic indices this is where you're forced to chart natively, since Volatility Indices don't trade anywhere else.
  2. Click the chart-type icon in the top-left of the chart panel (default is usually "Line").
  3. Select "Candles" or "OHLC" from the dropdown — candlesticks give you the wicks and bodies you need for price action reads.
  4. Open the indicator menu (the "f(x)" or chart-icon button) and add what you need — moving averages, RSI, Bollinger Bands and MACD are all in the standard set.
  5. Set your timeframe from the bar along the top — Deriv Trader runs from 1-tick and 1-minute charts up through daily, which matters if you're scalping Volatility 75 on tick data.
  6. Once your layout looks right, click the save/template icon to store it as your default — it'll reload next session without resetting.

What you gain and what you lose versus Supercharts

What you gain is speed: no symbol mismatch, no switching windows between analysis and order ticket, no latency between spotting a setup and clicking the fill. For anyone running a tradingview for deriv comparison with scalping in mind, that single-window loop usually wins.

What you lose is depth. Deriv Trader's charting is built for execution, not analysis — you're working with a fraction of TradingView Supercharts' indicator library, there's no Pine Script for custom logic, no cross-device layout sync if you trade from both desktop and mobile, and any drawings you add — trendlines, Fibonacci levels, channels — stay local to that session and don't travel to your TradingView account. If you rely on a saved multi-year drawing library, this workflow will frustrate you fast.

We'd recommend this route specifically for traders scalping Volatility Indices and other synthetic indices, where Deriv is the only venue the symbol exists on anyway — you have no real alternative, so the native charting's limitations matter less. For swing traders working standard forex or indices pairs that also list on TradingView, the trade-off tips the other way, and that's where Workflow 2 (charting on Supercharts, executing on Deriv MT5 or cTrader) earns its place.

Workflow 2: Chart on TradingView, execute on Deriv MT5 (the dual-screen setup)

This is the setup most Deriv traders settle into once they're past the demo stage: TradingView Supercharts open for structure and indicators, Deriv MT5 open purely as an order terminal. You read price on one screen, you click on the other. It costs you a second or two of lag, but it buys you charting tools Deriv's native platform doesn't have.

Step-by-step: matching symbols across both windows

  1. Open your TradingView chart and load the symbol — say XAUUSD or EUR/USD. Confirm which data feed TradingView is using (check the exchange tag next to the ticker); it's rarely Deriv's own feed unless you've linked a Deriv data source.
  2. Cross-check the contract specification against Deriv's own symbol — pip value, digits, and session hours can differ slightly from the feed TradingView is plotting. This matters more for gold than for majors.
  3. Mark your levels: entry zone, stop, and target, directly on the TradingView chart using horizontal lines or your indicator of choice.
  4. Open Deriv MT5 side by side (or on a second monitor) and load the identical symbol.
  5. Pre-fill the MT5 order ticket — lot size, stop loss, take profit — before price gets anywhere near your trigger. Don't build the ticket under pressure.
  6. When the TradingView signal fires, execute in MT5. If you're not watching the screen full-time, place the pending order (limit or stop) in advance instead of waiting to click a market order.

Window layout and hotkey discipline

Put TradingView on the screen you look at more — usually the left — and keep MT5's order ticket visible at all times, not minimized in a taskbar. If you're on one monitor, use Alt+Tab muscle memory or MT5's one-click trading panel docked in a corner so you're never hunting for the ticket while price runs. Traders who fumble the window switch during a fast XAUUSD move are the ones who chase the fill three pips worse than planned.

The latency trade-off you are accepting

Two failure modes come standard with this workflow. First, quote differences: TradingView's feed and Deriv's own pricing engine won't always print the exact same tick at the exact same millisecond, so the pixel-perfect level you marked on Supercharts may not be the price Deriv fills you at. Second, human delay — the one-to-three seconds between seeing your trigger candle close and actually clicking buy in MT5. That's real slippage, not imagined.

The fix isn't faster reflexes, it's different order types. Place limit and stop orders ahead of the move instead of chasing market fills — let the order sit at your level while you're doing something else. And size your stop off ATR rather than the exact line you drew on the TradingView chart; a stop pinned to a precise pixel gets clipped by the quote discrepancy between feeds, while an ATR-based stop has enough room to absorb it. This single adjustment is the difference between a workflow that's merely convenient and one that's actually tradeable.

Workflow 3: TradingView alerts, Pine Script and webhook execution

An alert that fires on your exact condition means you stop babysitting the chart and let TradingView tell you when price does something worth acting on. For deriv tradingview workflows, alerts are the glue between the chart you're analyzing and the MT5 terminal you're actually trading from — but the step from "alert fires" to "order fills" is where most traders overestimate how automated they really are.

Step-by-step: building an alert that fires on your condition

  1. Build or load the Pine Script indicator or strategy you want to monitor — a moving average cross, an RSI threshold, a custom breakout script, whatever defines your setup.
  2. Right-click the chart (or use the alarm clock icon) and select Add Alert.
  3. Set the condition to your indicator or strategy, not just "crossing" on price — strategy alerts can reference buy/sell signals generated by the script itself, which is cleaner than eyeballing a cross.
  4. Choose trigger frequency: "Once Per Bar Close" is the one you want for anything you'll act on. "Once Per Bar" fires on the wick and will burn you with false signals that reverse before the candle closes.
  5. Name the alert something you'll recognize at 2am — "XAUUSD H1 EMA cross long" beats "Alert 14."
  6. Set expiration and notification method (app push, email, or webhook URL on paid plans).

Webhook alerts and third-party bridges

Webhook alerts let TradingView send a JSON payload to a URL the moment your condition triggers — that's the mechanism automated trading setups are built on. The problem: Deriv doesn't have a native webhook listener for MT5, Deriv X or Deriv cTrader. To go from webhook to a live order, you need a third-party bridge or an Expert Advisor acting as a listener, polling or receiving that payload and translating it into a trade on your Deriv terminal. This is unofficial — not something Deriv or TradingView support or test together. You're stitching two platforms into one pipeline using someone else's middleware, and every link in that chain is a place for the signal to arrive late, malformed, or not at all.

Where automation breaks and what it costs you

The failure mode that matters isn't a missed entry — it's a bridge that disconnects mid-position. If your EA listener drops its connection while you're holding a trade, nothing is managing that position until you notice and intervene manually. That's why hard stops belong on the server side, placed directly on the MT5 order, never left to live only inside the Pine Script logic waiting for the next webhook to fire a close signal. A script can't close a trade it never hears about.

Treat webhooks as alert routing first, not full automation. Run the whole chain — alert, bridge, EA, fill — on a demo account for weeks before you let it touch anything funded. Watch for dropped payloads during news spikes like NFP or FOMC, when webhook volume surges across TradingView and bridges queue or silently fail. If you're testing this ahead of a Challenge, remember the evaluation trading happens on simulated capital — a bridge failure there costs you the attempt, not real money, which makes it the right place to find these gaps before they're expensive.

Ready to trade funded capital?

Choose your path — Instant Accounts, One-Step or Two-Step Challenges — from just $23, with up to $300,000 in funded capital.

Choose your challenge

Build a Deriv watchlist in TradingView: which symbols actually map

Short answer: Deriv's forex, gold, stock indices and major crypto pairs all map cleanly to standard TradingView tickers — but the Volatility Indices, Crash/Boom and Step Index products do not exist on TradingView under any symbol, because they're synthetic series generated by Deriv's own engine, not fed by an external exchange. Stop searching "VIX75 TradingView" — it's not a typo problem, it's a data problem.

Deriv symbol to TradingView ticker mapping

Here's the cheat sheet for building a deriv tradingview watchlist without wasting twenty minutes guessing ticker formats:

Deriv instrumentTradingView ticker (typical feed)Notes
Gold vs USDXAUUSD (OANDA, FXCM, or FOREXCOM)Spreads vary by feed — check which one matches your Deriv MT5 quotes closest
EUR/USDEURUSD (FX_IDC or OANDA)Standard major pair, near-identical price action to Deriv's feed
US Tech 100NAS100 or US100 (depending on provider — TVC, OANDA, CAPITALCOM)Deriv calls it US100; TradingView providers often list as NAS100
US 30 / Wall StreetUS30 (OANDA, TVC)Dow proxy, same logic as above
BTC/USDBTCUSD (COINBASE, BITSTAMP)Crypto feeds track closely; minor basis differences at low liquidity hours
Volatility Indices (VIX 10/25/50/75/100)— none —Proprietary synthetic feed, not published externally
Crash/Boom Indices— none —Same reason — generated series, no external ticker
Step Index— none —No TradingView equivalent exists

Why Volatility Indices are not on TradingView

TradingView charts whatever a data vendor publishes — exchange feeds, forex ECNs, crypto exchanges. Deriv's Volatility Indices aren't quotes from any exchange; they're algorithmically generated price series designed to simulate constant volatility, and that engine only exists inside Deriv's own infrastructure. No vendor relationship to license, so no ticker to request. If you trade VIX75 or Boom 1000, your charting has to stay on Deriv's own platform or MT5 — TradingView simply has nothing to plot.

Building and saving your Deriv tradingview chart setup

  1. Open a new layout, search XAUUSD first — it's the instrument most Deriv traders chart daily, so pin it to the top.
  2. Add EUR/USD, US100 (or NAS100 depending on your feed), and BTCUSD below it.
  3. Right-click each symbol in your watchlist and apply a colour flag — red for indices, yellow for gold, blue for crypto. It sounds cosmetic but it cuts scan time when price moves across sessions.
  4. Group by session using the watchlist's section headers: "London/NY Majors" above, "US Session Indices" below. Matches how Deriv's own session liquidity actually behaves.
  5. Save the layout and name it something you'll actually search for later — "Deriv Core Watchlist" beats "Layout 3".

Do you need a paid TradingView plan?

For charting Deriv's standard symbols, the TradingView free plan is genuinely enough to start: one chart layout, a handful of indicators, and basic alerts cover most swing and intraday setups on XAUUSD or US100. Where it gets tight is volume — if you're running multiple alerts for webhook-triggered execution (covered earlier) or want several saved multi-chart layouts open side by side, you'll hit the free tier's ceiling fast and need Plus or Pro. Don't upgrade speculatively; upgrade when you've actually bumped the alert limit.

'Deriv TradingView app' and APK downloads: what's real and what's a scam

Flat answer: there is no joint Deriv TradingView app, and no such product has ever been listed on Google Play or the App Store. If you search "deriv tradingview app" or "tradingview deriv apk download" and land on a file hosted outside an official store, you're looking at an unofficial build — and in this niche, unofficial usually means malicious, not just unpolished.

There is no official combined app

Deriv and TradingView are separate companies with separate codebases. TradingView is a charting and social platform; Deriv is the broker where you execute. They integrate the way most brokers integrate with TradingView — via charting widgets and symbol feeds, not a merged mobile client. Any APK marketed as "Deriv TradingView" combined is, by definition, built by a third party with no relationship to either brand. That alone should be your first red flag, before you even open the file.

How to spot a fake trading APK

Sideloaded trading APKs are a known vector for credential theft, and the pattern repeats across every broker brand, not just Deriv. Watch for:

  • Hosting outside Google Play or the App Store — a direct .apk link, a Telegram channel, or a third-party "app store" site is never how legitimate brokers or TradingView distribute software.
  • Accessibility permission requests — a charting or execution app has no legitimate reason to ask for Android's Accessibility Service, which can read your screen, including 2FA codes and typed passwords.
  • Signal or guaranteed-result promises — "connect this app and get 90% win-rate signals" is a marketing hook for a credential harvester, not a trading feature.
  • Anonymous, recently-created developer accounts — check the publisher name and history before installing anything that touches your trading login.

Account recovery after a fake trading app harvests your login, API keys, or OTP codes is close to impossible once funds or simulated balances have been moved or your API access has been abused. This isn't a "restore from backup" situation — treat any fake trading app the same way you'd treat a phishing email asking for your bank PIN.

The safe install path on mobile

Install the two apps separately, from their own official listings, and run them side by side:

  1. Install TradingView from Google Play or the App Store directly — search "TradingView," verify the publisher is TradingView, Inc.
  2. Install the official Deriv app (or Deriv MT5 / Deriv cTrader, depending on which execution venue you're using) separately, again confirming the publisher name.
  3. On Android, use split-screen to run TradingView charts in one pane and your Deriv execution app in the other.
  4. On iPad, use Stage Manager or Split View the same way — chart on TradingView, place and manage orders in the Deriv app.

Two separate, store-verified apps running side by side gives you everything a fake combined app claims to offer, minus the mobile trading security risk.

Taking your TradingView workflow into a funded evaluation

The chart doesn't change when you move from a personal Deriv account to a prop firm challenge — the risk envelope does. Your TradingView setup, your drawing tools, your indicators, all transfer as-is. What's new is that every entry now has to survive a daily loss limit and a max drawdown ceiling before it survives a directional call. That reframes position sizing as the first decision you make, not the last.

What changes when drawdown rules are enforced

On a personal account, a bad trade costs you money and ego. In a funded account evaluation, a bad trade — or a cluster of them on the same day — can end the challenge outright if it breaches the daily loss limit. Before you take the entry, annotate your TradingView chart with the actual pip or dollar distance between your current equity and that day's loss ceiling. If your daily loss limit leaves you $400 of room and your stop on XAUUSD is 35 pips wide at $10/pip, you've got room for roughly one full-size loss, not three. That math belongs on the chart, not in your head mid-trade. Same logic applies to max drawdown — track it as a running distance-to-breach number, updated after every close, the same way you'd track ATR.

Charting the same instruments on a prop platform

You don't need a new watchlist. Across For Traders' platform, XAUUSD is the single most-traded instrument — gold is the center of gravity for most challenge traders, not a side bet — with US indices like US100 forming the second-biggest cluster. If you've already built a TradingView process around gold breakouts or NASDAQ pullbacks, that process transfers directly into the evaluation environment. The instruments don't change; only the consequence of sizing them wrong does.

Where For Traders fits

For Traders is an educational prop trading platform, not a broker — you're trading simulated capital through a structured evaluation, and passing earns a funded account with performance rewards tied to that simulated trading. Routes include the Two-Step Challenge for traders who want a staged evaluation, Instant Funding for those who'd rather skip the evaluation phase entirely, and CME futures access for traders who want ES and NQ alongside forex and gold. Being straight with you: pass rates on any prop firm challenge, including ours, are low industry-wide. The traders who do pass aren't running a better indicator than everyone else — they're the ones who treated the daily loss limit as the first line of their trading plan, not a rule they discovered after breaching it.

Ready to trade funded capital?

Choose your path — Instant Accounts, One-Step or Two-Step Challenges — from just $23, with up to $300,000 in funded capital.

Choose your challenge

Pros and cons of a TradingView-first Deriv workflow

Pros

  • Best-in-class charting: deeper indicator library, cleaner drawing tools and Pine Script that no Deriv-native platform matches
  • Layouts, watchlists and alerts sync across desktop, web and mobile so your levels follow you
  • Alerts let you monitor a dozen instruments without staring at a single chart all session
  • The same chart setup transfers unchanged to any broker or prop evaluation platform you move to later
  • Backtesting and replay mode let you forward-test a Deriv strategy before risking a cent

Cons / risks

  • No native order entry — Deriv is absent from TradingView's broker panel, so every fill happens in a second window
  • Deriv's synthetic Volatility Indices cannot be charted on TradingView at all
  • Quotes on TradingView's data feed may differ slightly from Deriv's pricing, which matters for tight stops
  • Multiple alerts, webhooks and multi-chart layouts require a paid TradingView subscription
  • Webhook-to-execution bridges are third-party and unofficial, adding a failure point between signal and fill

Frequently Asked Questions

Can I connect TradingView directly to Deriv and trade from the chart?+

Deriv does not offer a native, direct TradingView-to-Deriv order execution bridge the way some brokers plug straight into TradingView's trading panel. Deriv uses its own platforms — Deriv MT5, Deriv X, and its web trader — which embed TradingView-style charting libraries, but placing a live order from a standalone TradingView chart onto your Deriv account isn't a built-in feature. Traders typically run TradingView in a second tab for analysis (drawing levels, scanning multiple symbols) and then execute the trade manually on Deriv MT5 or Deriv X. Some use third-party webhook bridges, though these carry execution-lag and reliability risk.

What is TradingView and how does it work with Deriv?+

TradingView is a charting and analysis platform used by millions of traders to track price action, run indicators, and share ideas — it's not a broker itself. With Deriv, TradingView's charting technology (or a close equivalent) is licensed inside Deriv's own trading apps, so the candles, drawing tools, and indicators feel familiar if you've used TradingView before. For actual order execution, price feeds, margin, and account balance, you're still working inside Deriv's ecosystem (MT5, Deriv X, or Deriv Trader), not TradingView's own order system.

How do I set up TradingView charts with Deriv step by step?+

Set up starts on Deriv's side, not TradingView's: open a Deriv MT5 or Deriv X account, fund it (demo or real), then launch the integrated platform where TradingView-style charts load by default. From there select your instrument — forex pair, synthetic index, or CFD — choose your timeframe, add indicators from the built-in library, and save your layout as a template. If you want pure TradingView.com for extra analysis, open it separately, chart the same symbol (where listed), and cross-reference your levels before executing the trade on Deriv.

Does Deriv MT5 or Deriv X use real TradingView charts, or a lookalike?+

Deriv MT5 and Deriv X run on MetaQuotes' and Deriv's own charting engines respectively, not on TradingView's actual codebase — the charts look and feel similar because most modern platforms converge on the same candlestick, drawing-tool, and indicator conventions traders expect. If precise TradingView-branded charting matters to you — specific indicator scripts, Pine Script alerts, or community layouts — you'll need TradingView.com itself for analysis and then route execution through Deriv's native platforms separately.

Can I chart Deriv's synthetic and volatility indices on TradingView?+

Deriv's proprietary synthetic indices (Volatility 75, Boom, Crash, Step Index, and similar) are generated by Deriv's own pricing engine and are not standard listed instruments on TradingView's public symbol database. You can chart them inside Deriv MT5, Deriv X, or Deriv's web trader, where the data originates. TradingView is better suited for forex, major indices, commodities, and crypto that Deriv also offers — for those, cross-charting on TradingView alongside your Deriv execution platform works fine.

Is there a Deriv TradingView app or APK download, and is it legit?+

Deriv does not publish an official branded 'Deriv TradingView' app, and any APK claiming to be one outside Google Play or Deriv's own site should be treated as a red flag. The legitimate path is downloading Deriv MT5 or Deriv X from Deriv.com or the official app stores, and separately downloading TradingView's own app from its verified listing if you want standalone charting. Sideloaded APKs bundling both names are a common phishing and malware vector — never install trading software from unofficial links.

Deriv vs TradingView — are they competitors or complementary?+

They're complementary, not competitors: Deriv is a broker offering execution, accounts, and instruments including synthetic indices, while TradingView is a charting and social-analysis platform with no execution of its own for most brokers. Traders commonly use TradingView to scan markets, backtest ideas, and follow analysts, then execute the actual positions through Deriv's platforms. Think of TradingView as your research desk and Deriv as your execution venue — the two serve different jobs in your workflow.

Do I need a paid TradingView plan to use it with Deriv?+

A free TradingView account covers basic charting, a handful of indicators, and single-chart layouts, which is enough for most retail analysis paired with a Deriv account. Paid tiers (Pro, Pro+, Premium) unlock more simultaneous indicators, multiple charts per layout, extra alert capacity, and faster data refresh — useful if you're scalping multiple synthetic indices or running several alert-based setups at once. Since Deriv itself doesn't require any TradingView subscription to function, the choice comes down to how deep your charting workflow needs to go.

Can I use TradingView charts to trade a prop firm challenge instead?+

Plenty of traders use TradingView purely for analysis and then execute their actual challenge trades on MT5 or cTrader through a prop trading firm, rather than a retail broker like Deriv. For Traders, for example, runs its Two-Step and Three-Step Challenges on MT5-based platforms where you can mirror your TradingView analysis and trade toward a Funded Account and performance rewards on simulated capital. It's worth comparing — a retail Deriv account and a prop firm challenge serve different goals: personal trading capital versus earning a funded account through an evaluation.

MH

Written by

Marcel Hambálek

Senior Trader, For Traders

Marcel trades Futures and Forex day-trading setups on funded accounts and writes about the executional details most traders skip — order types, slippage, session timing, platform quirks on MT5 and NinjaTrader. Pragmatic, mechanics-first, no fluff.

Follow on LinkedIn

Ready to trade funded capital?

Choose your path — Instant Accounts, One-Step or Two-Step Challenges — from just $49, with up to $300,000 in funded capital.

Choose your challenge

Trade up to $300,000

Choose challenge